Skip to main content
Version: 5.0.4

Multi Object Detection

Multi-object detection

A Multi Object Detection alarm is triggered whenever people or vehicles (ground, air and watercraft) are detected within a set time frame or location. It has high accuracy and low false alarm rate even at long range and with different light conditions. This method of detection is ideal for specialised use cases that require the detection, classification and filtering of objects, to determine if the following is true:

Person or Vehicle is:Use case example
at the wrong placeTruck blocking an emergency exit
at the wrong timeA vehicle is detected at night in a daytime-only parking lot
of the wrong typeMotorcycle occupying a bicycle parking spot
  • Core technology: full body and vehicle detection.
  • Available classes: person, car, bus, truck, motorcycle, bicycle, train, boat, airplane
  • Compatible with fixed, PTZ, and thermal cameras.
  • Areas of interest can be defined.
  • Send alarm notifications to third-party software.

Uses 100 analysis slots by default - see the table below for resource usage percentages on specific hardware.

HardwareResource usage (percent)Solution number limit on device
Nvidia Jetson NX10%10
x86-641,4%71

New Multi Object Detection

To add a Multi Object Detection alarm, follow the steps as laid out in New Intrusion.

Compared to Intrusion, you can detect 3 more types of objects (train, boat, airplane) with this feature.

Before setting up HTTP / End of event message sending for Multi Object Detection alarms, consider reading the guide for third-party integration first.